Final call for applications is July 10, 2020.



As you may know, due to COVID-19 and its unprecedented and unanticipated effect on all of our lives, Display Week 2020, August 3-7, has been reformatted as a virtual event. Although the new format presents challenges, it also offers opportunities. We are therefore delighted to extend I-Zone applications through June 30, 2020.

I-Zone provides a special exhibit area for technology prototypes, proofs of concept, and new products that have been on the market no more than six months prior to Display Week. Selected I-Zone participants will exhibit for the five days of the Display Week 2020 virtual event free of charge. I-Zone provides space for not-yet-commercialized prototypes and proofs of concept at the premier display exhibition in North America. If you represent a small company, startup, university, government lab, or independent research labs and have cutting-edge display-related technology to demonstrate, the I-Zone committee wants to see your proposal.

For a look at a recent outstanding I-Zone technology, watch this interview with representatives of Holst Centre, the winners of last year’s Best Prototype Award for their highly transparent, thin-film biometric scanner integrated on top of a flat-panel display

Proposals for demonstrating new displays, input technologies, and innovations in related fields such as lighting and organic electronics will all be considered by the committee. Technologies should be in the pre-product stage or at least have been on the market no earlier six months prior to June 2020. Demos that will be shown for the first time in a public forum at I-Zone are especially encouraged. Selections will be based on the novelty, interest, and quality of the prototype to be exhibited as described in the proposal. A knowledgeable person must be willing to answer attendee questions (via a messaging Q&A rather than in real time) while the I-Zone is open to attendees August 3-7.

This new virtual format will provide exhibitors with many financial benefits over the physical show, such as the elimination of travel expenses including lodging and airfare. More importantly, as the content of Display Week 2020 is scheduled to remain online for multiple months after the week of August 3, the digital exhibits will be seen and engaged with by attendees of Display Week 2020 for much longer than normally possible.

2020 I-Zone applications are now open through July 10, 2020. Submit your application here.

Before submitting your application, please make sure that:
• Your product or technology represents a novel advancement.
• Your product or technology is not on the market or at least was not on the market before January 2020.

In addition to filling out the submission form, your entry should include:

• A 100-word abstract describing your project, its innovation, and problem it is designed to solve or capability it will offer.
• A one-page summary describing in more detail the novelty and potential application for your product.
Any relevant photographs, videos (no longer than 3 minutes), or diagrams. Note: links to videos or high-resolution imagery are preferred to attachments

For any questions related to the I-Zone, please email:

Award Winners

Best Prototype at Display Week 2019

Holst Centre for its highly transparent, thin-film biometric scanner integrated on top of a flat-panel display

The 2019 I-Zone honorees were:
•  Boréas Technologies for its low-power, multi-frequency haptic driver architecture suitable for mobile devices
•  LPKF Laser & Electronics AG for its novel laser-etching process enabling foldable display substrates
•  Sonavi Labs for its digital stethoscope with a unique integration of low-power display and touch technology with global life-changing implications
•  TouchNetix, Ltd. for its commercialization of multifunction IC that includes capacitive touch, force sensing, and haptic feedback

Best Prototype at Display Week 2018

Hong Kong University of Science and Technology

The 2018 I-Zone honorees were:
•  Dimenco, founded in 2010 by former Philips engineers, showed its newest LC alignment layer for switchable lenses in the I-Zone
•  Hong Kong Beida Jade Bird Display Hong Kong Beida Jade Bird Display (JBD) showed an active-matrix microLED in a chip format
    with 5K pixels per inch and 1 million cd/m2of luminance (green rated at 500 lu, red rated at 300 lu, blue at 250 lu).
•  PlayNitride, Inc., created a transparent display using a unique process to transfer its RGB microLEDs onto the backplane substrate.
    The group showed a 3.12-in. diagonal 256 × 256 resolution, transparent, full-color RGB microLED display with a luminance of more
    than 800 cd/m2and a wide color gamut
• XTPL SA has developed technology that enables ultraprecise printing of nanomaterials. According to the company, the XTPL solution
   allows users to repair interrupted thin conductive lines in the production stage, without complicated, slow, and expensive vacuum processes.

Best Prototype at Display Week 2017

IGM, University of Stuttgart, in partnership with Hella KGaA Hueck & Co.

The 2017 I-Zone honorees were:
•  Jasper Display Corporation and glō for a megapixel silicon backplane (4K × 2K) and spatial light modulator technology for microdisplays.
•  Turtle Beach and Nepes Display for HyperSound Glass, the world’s first highly directional and transparent parametric speaker.


Best Prototype at Display Week 2016

nVerpix Takes Best Prototype Honors in the I-Zone

I-Zone 2016 Winner Interview    Youku


Best Prototype at Display Week 2015

Ubiquitous Energy for its ClearView Power Energy Harvesting technology

I-Zone 2015 Winner Interview    Youku


Best Prototype at Display Week 2014

Ostendo Technologies for a novel Quantum Photonic Imager display device.

I-Zone 2014 Winner Interview    Youku


Best Prototype at Display Week 2013

Shinoda Plasma Co., Ltd., for a new film-type display using plasma tube arrays.

I-Zone 2013 Winner Interview    Youku


Best Prototype at Display Week 2012

Tactus Technology, for transparent physical buttons that rise up from a touchscreen surface on demand

I-Zone 2012 Participant Tactus Technology's VP of Business Development commented on their firm's experience as follows:

Tactus chose SID as the venue to launch our company.  The event has a good mix of press, analysts, technologists and potential customers, so we thought it an ideal opportunity.  We were very excited when we learned about the new I-Zone section of the show and were eager to apply for participation.  Given that this was going to be our first show, the team was elated when we learned that we were selected as a participant.  

The show was a non-stop flood of people.  We made some very good new contacts, and also connected with companies with which we had already established relationships.  The icing on the cake was when it was announced that we had won the best prototype award.  It was very validating.  We then had the opportunity to join the awards luncheon and be recognized with the likes of LG, Samsung and Qualcomm. Along with our launch at the show, we ramped up our PR efforts.  We sent out our release the morning of the show and met with a few key reporters at the show to brief them on the announcement that we would be demoing at SID.  The buzz just grew from there.  Within the week, there were more than 150 articles written, more than 2.5 million people who read the news about us, and more than 1 million people who watched our product video.  You can check the major news outlets that covered us from our website:

View Our Publications


View our archives

Get the latest display news and updates
straight through your email





Watch this interview with Francois Jeanneau, CEO of 2017 I-Zone participant Novasentis, for an idea of what it’s like to exhibit in the I-Zone.